Steel Space Frame Structure Supplier - SAFS

                 Steel structures are widely used in the construction industry, but many people do not understand the difference between HN and HW steel structures. What role do they play in steel structures? SAFS steel structure engineering company will take you to understand: The difference between HN and HW: H-beam is welded, HM, HN, HW are hot-rolled. HM is called middle flange H-beam, and the ratio of H-beam height to flange width is 1.33-1.75. It is mainly used as steel frame column in steel structure. Used as frame beams in load-bearing frame structures, such as equipment platforms. HW is called wide flange H-beam, and the height of the H-beam is basically equal to the width of the flange. It is mainly used for steel core columns in reinforced frame structures, also known as rigid steel columns, and is mainly used for columns in steel structures. WH270*250*18*23 is for welding H-beam W is the first letter of welding. After reading the above introduction, do you have a certain un

         What are the standards for building gas stations with steel sapce frame  structure? Let's take a look. The most important material used in the construction of gas station sapce frame s is steel sapce frame . Therefore, the quality of the steel structure used is directly related to the quality of the mesh frame. The steel mesh frame structure used by users in the renovation of the roof of the gas station must meet the following points before they can be built:   Steel Structure Space Frame Gas Station 1.  The welding wire to be used in the installation of the steel mesh frame should be checked for the quality certificate before installation. The written content should fill in the actual inspection results of the manufacturer, especially the chemical composition of the welding wire, the mechanical properties of the deposited metal, the radiographic inspection results of the welding seam, and the imprint of the technical supervision department. Also pay attention to check the

        When we have not been exposed to the steel structure industry, we must not know much about it. But for professionals, they must know the reason. The same is true for steel structure space frame , so why should large-span steel structure projects be reinforced? 1. Changes in process operations cause changes in the structural layout and stress conditions of steel structures; 2. The increase of load (such as adding insulation layer to the roof of steel structure buildings, increasing the lifting capacity of cranes in steel structure workshops, or adding cranes to workshops without cranes, etc.); 3. Accidental damage, such as war damage, damage caused by natural disasters (such as earthquakes); 4. Various defects due to poor design consideration or design errors, as well as construction quality accidents of steel structure buildings. For example, the design of the truss gusset plate does not consider the construction assembly error, resulting in insufficient length of the welding s

  Building a steel structure canopy can be used to park our mobility vehicles, so that the vehicle can reduce corrosion and protect it from the wind and rain. So how should we design the steel structure canopy? SAFS steel structure is introduced here. steel structure canopy   To make a steel structure canopy, it is necessary to prepare a suitable amount of reliable materials. The rigid standard used in the entire canopy is divided into load-bearing steel columns, and 10cm*10cm square pipes are used, while the requirements for beams are slightly lower. The square tube of 4cm*8cm, and then the top of the canopy, can choose the membrane structure, which is more durable.   For welding, electrodes, wires, and fluxes are all indispensable materials. After purchasing these materials, you can start construction.   Before the steel frame is erected, the iron is pre-buried. After the steel plate is buried in the ground, use an electric welding machine and a level to ensure the level of the steel

                 1. Do a good job of the effect of the facade The steel structure warehouse  should have a relatively good façade effect, and pay attention to the overall process and layout of the warehouse , and all aspects will be done particularly well. The entire facade effect can better meet the needs of the craftsmanship, and it can also have simpler things in the process. In the design of the façade, it can better highlight its own jumping colors, and can achieve better results. 2. Simple and atmospheric style In the process of designing the steel structure warehouse , not only will there be a very good facade effect, but also the simple and atmospheric style will become very good. Choosing such a design can not only highlight these functions in general, but also see more things in the overall design. In the usual design, these styles can be truly combined to create a richer color. 3. Create a stronger sense of color Generally, when designing a steel structure warehouse , it sho

If we want to build a new building, then when choosing a construction method, we suggest that you can look at light steel prefabricated buildings . If you do not know the advantages of this product, then this article will take you to understand in detail. At present, when light steel prefabricated buildings are used, the use and design of space are more flexible, and because this product can reduce the damage to our environment when it is used, its advantages in the market are also obvious. Don't think that environmental problems have little impact on us, we have to think about it, because our awareness of environmental protection is increasing now, so if we want to choose unsatisfactory materials to build houses, then when these materials are mined, the cost The cost is relatively large, this is because the cost of mining is increasing. The material used in light steel prefabricated buildings is steel structure, and when we produce this material, the output is relatively large, an

  In the area where we live, I believe everyone should have seen a steel structure carport. And as the living conditions are getting better and better, the appearance of this building is getting better and better, so do you know what needs to be prepared when this product is under construction? SAFS steel structure is here to tell you about it. Image from: https://www.safsteelstructure.com/wp-content/uploads/2022/02/steel-structure-carport0.webp We should know that when the steel structure carport is being built, the steel structure is usually used, so when this product is built, we need to use welding materials, such as welding rods.   Then, in order to not affect the stress situation after welding, we must also measure the tools before construction. Otherwise, the welding position is likely to be wrong during welding, resulting in rework.   Of course, some people ask whether to lift the equipment. Usually, when the steel structure carport is built, the height is not particularly high