Reasonable design of steel structure canopy can save space

-

 Building a steel structure canopy can be used to park our mobility vehicles, so that the vehicle can reduce corrosion and protect it from the wind and rain. So how should we design the steel structure canopy? SAFS steel structure is introduced here.

 To make a steel structure canopy, it is necessary to prepare a suitable amount of reliable materials. The rigid standard used in the entire canopy is divided into load-bearing steel columns, and 10cm*10cm square pipes are used, while the requirements for beams are slightly lower. The square tube of 4cm*8cm, and then the top of the canopy, can choose the membrane structure, which is more durable.

 

For welding, electrodes, wires, and fluxes are all indispensable materials. After purchasing these materials, you can start construction.

 

Before the steel frame is erected, the iron is pre-buried. After the steel plate is buried in the ground, use an electric welding machine and a level to ensure the level of the steel column, and then weld the steel column to it. Pay attention to the distance between each steel plate. After welding everything else, the whole steel frame is basically built.

 

Weld the steel columns and beams firmly with an electric welding machine, pay attention to ensure the verticality of the steel columns and the horizontal position of each beam, otherwise the entire steel frame will not be strong, and the roof will be covered after welding.

 

The appearance of the high-strength membrane structure makes the service life of the canopy reach 30 to 40 years. The light transmittance of the top of the membrane structure is relatively good, and it can also block the damage of ultraviolet rays to the car. The material of the SAFS steel structure project also played a role in the production of the canopy.

Comments

Post a Comment

Popular posts from this blog

In what areas are steel structures usually used

-
Image
Steel structure manufacturers can process a wide variety of products, including the following categories: 1. Single and multi-story industrial and residential buildings. 2. Office buildings, primary and secondary schools, hospitals. 3. Luxury villas, tourism buildings. 4. Modern commercial buildings for various markets. 5. Mobile buildings (demountable buildings, emergency projects). The main building materials in membrane structure engineering are steel and membrane materials. For steel structures, the main processing flow includes: material feeding → cutting → inspection → assembly welding → rust removal → numbering packaging → factory. The precautions are: 1. Materials must have a material certificate. 2. According to the cutting length and rod specifications calculated by the designer, the rods are classified and stacked for easy construction in the next step. 3. According to the penetration size of the steel pipe, considering the influence of wall thickness and groove, the automa
Read more

Three Methods of Space Frame Installation

-
Image
  What are the 3 methods of space frame  installation ? SAFS steel structure professional technical staff share with customers and friends:   1.  Splicing the entire space frame  directly, after the completion  of  the corresponding ceiling method to hoist the entire space frame  into the air, and then within a certain hovering time, weld the space frame  in the corresponding position and connect it with the whole  building . This method is faster  to install, but has higher requirements for operators. 2.  The method is relatively mild, the space  frame works directly at a high place, and the space  frame is installed bit by bit through the part that intersects with the building, that is, starting from the surrounding area and completing the work at the final center point. The schedule  is very slow, but the operation difficulty is also reduced a lot. 3. This method is mainly applicable to the quadrangular pyramid structure and the triangular pyramid structure. Each vertebral structure
Read more

Coal Storage Facilities: The Future with Steel Structures and Space Frames

-
Image
  Coal storage facilities, including coal storage sheds, dry coal yards, and coal storage warehouses, have always been crucial in the coal industry. The application of steel structures and space frame technology is redefining the future of these coal storage facilities. These technologies not only enhance coal storage efficiency but also improve facility performance and sustainability. Challenges of Coal Storage Facilities: Coal storage facilities need to store large quantities of coal while ensuring it remains dry and of high quality. Traditional coal storage facilities often face issues such as coal dust emissions, inadequate humidity control, and maintenance difficulties. The application of steel structures and space frame technology offers new solutions to address these challenges. Advantages of Steel Structures: Steel structures play a pivotal role in coal storage facilities. Their high strength and flexibility make them an ideal material for supporting large-scale coal storage
Read more