The fields widely used in spherical space frames

-

 Spherical space frame used in a wide range of fields

1. Before installation, under the condition of ensuring the complete conditions of the engineering drawing, check the model specifications and total number of the prefabricated components of the spherical space frame. Place the prefabricated component storage positions in the installation order to facilitate the installation of the spherical space frame.

2. Check the quality of the silk mouth before installation, clean up the wire holes and snails, and turn in after clean and tidy. The high -strength bolt should be tightened immediately to ensure that it does not damage the lower bend of the spherical space frame.

3. Install a cross -section ball and pole of the prefabricated components and the serial number of the ball on the engineering drawing to form a vertical space frame and tighten the high-strength bolt.

4. Install rubber support immediately in a span. For good column top segmentation lines and axes. Use the standardized meter to adjust the elevation, and adjust the deviation.

5. Installing the chord ball must determine the short -term fulcrum of the elevation to ensure the elevation of the string ball.

The spherical steel structure space frame is more suitable for large span steel roofs, because it has characteristics such as large bending, saving board, good seismic effects, small building spacing, and unique shape design. At this stage, steel houses in large and small fitness exhibition halls, exhibition halls, cinemas, factories, warehouses and other engineering buildings are used in the steel house frames of engineering buildings.

Comments

Post a Comment

Popular posts from this blog

In what areas are steel structures usually used

-
Image
Steel structure manufacturers can process a wide variety of products, including the following categories: 1. Single and multi-story industrial and residential buildings. 2. Office buildings, primary and secondary schools, hospitals. 3. Luxury villas, tourism buildings. 4. Modern commercial buildings for various markets. 5. Mobile buildings (demountable buildings, emergency projects). The main building materials in membrane structure engineering are steel and membrane materials. For steel structures, the main processing flow includes: material feeding → cutting → inspection → assembly welding → rust removal → numbering packaging → factory. The precautions are: 1. Materials must have a material certificate. 2. According to the cutting length and rod specifications calculated by the designer, the rods are classified and stacked for easy construction in the next step. 3. According to the penetration size of the steel pipe, considering the influence of wall thickness and groove, the automa...
Read more

Three Methods of Space Frame Installation

-
Image
  What are the 3 methods of space frame  installation ? SAFS steel structure professional technical staff share with customers and friends:   1.  Splicing the entire space frame  directly, after the completion  of  the corresponding ceiling method to hoist the entire space frame  into the air, and then within a certain hovering time, weld the space frame  in the corresponding position and connect it with the whole  building . This method is faster  to install, but has higher requirements for operators. 2.  The method is relatively mild, the space  frame works directly at a high place, and the space  frame is installed bit by bit through the part that intersects with the building, that is, starting from the surrounding area and completing the work at the final center point. The schedule  is very slow, but the operation difficulty is also reduced a lot. 3. This method is mainly applicable to the quadrangular pyrami...
Read more

Space frame has become one of the important fields of modern architectural structure

-
Image
Since the 20th century, the spatial structure has been greatly developed all over the world. The space frame structure is a kind of space grid structure. The so-called "space structure" is relative to the "plane structure", which has the characteristics of three-dimensional function. The space structure can also be regarded as the expansion and deepening of the plane structure. Since the advent of the space structure, it has been welcomed by people for its high-efficiency mechanical performance, novel and beautiful form, and fast and convenient construction. In stadiums, convention centers, cultural facilities, transportation hubs and even industrial plants that require large spans and large spaces, space structures can be seen everywhere.   After a century of continuous development of space structure, in terms of structural form, in addition to space frame and reticulated shell, membrane structure, tensegrity system, open and close roof, and foldable structure are...
Read more