Eight safety measures for large steel structure platforms

Eight safety measures for large-scale steel structure platforms, China SAFS Steel Structure will introduce to you:

1. The steel structure platform should be equipped with a load limit plate, especially the steel structure platform with hydraulic lifting channel, and the limit load should be marked in a prominent position;

2. The placement point and the upper tie point of the steel structure platform must be located on the building, and shall not be set on construction equipment such as scaffolding, and the support system shall not be connected with the scaffolding;

3. The concrete beam slab at the placement point of the steel structure platform should be embedded and connected with the bolts of the channel;

4. The horizontal angle between the wire rope and the channel should be 45 degrees to 60 degrees;

5. The tensile strength of the beams and columns of the tension nodes on the upper part of the steel structure platform should be checked to ensure the safety of buildings and channels;

6. Use a snap ring when installing the steel structure platform, and the hook should not be directly hooked to the channel ring;

7. When installing the steel structure platform, the steel wire rope should be fastened with special hooks. When other methods are adopted, there should be no less than 3 buckles. The wire rope around the acute angle of the building should be lined with cushions, and the outer opening of the steel structure platform should be slightly higher than the inside;

8. Protective fences need to be installed around the steel structure platform, and fences need to be installed when necessary to prevent people or goods from falling.